Get Support
+91 96626 93148
Performance Masking Tape
Product Description
Performance masking tape characterized by a consistent medium crepe paper backing and Rubber resin adhesive. Able to conform on irregular surface, resist to tractions and abrasions, it is suitable Indoor application, for painting operati on in capable to exposure ultra-violet (uv) light for up to five hours Recommended to be removed within 24 hours.
Properties
| Metric | Imperial Units | Test Method | |
| Total weight* | 115 g/m2 | 115 g/m2 | ISO 536 |
| Total thickness (± 5)* | 145 Mic. | 5.7 mils | AFERA 5006/PSTC 133 |
| MD tensile strength* | 40 N/cm | 3.5 Lbs/in | AFERA 5004/PSTC 131 |
| MD elongation at break* | 7% | 7% | AFERA 5004/PSTC 131 |
| Adhesion to steel plate* | 5 N/cm | 7.98 oz/in | AFERA 5001/PSTC 101 |
| Service temperature | Up to 60 ̊C | Up to 140 ̊F |
Backing material
Saturated crepe paper
Type of adhesive
Rubber Based
Available color
Off White,Green
- Medium/high adhesion
- Consistent paper for higher traction & abrasion resistance
- High conformability
- Clean removal in warm environments
- Good contact on multiple surface
- Good paint anchorage
- Masking and painting in DIY and professional operations (no UV exposure recommended)
- Non-critical bundling, splicing & holding
- Temporary labeling & marking activities
All technical information and date above mentioned are provided to the best of our knowledge on the basis of our practical experience. Figures shown refer to averaged average value only, based on tests carried out in conditional laboratory and are nor valid for specification. The company reserves the right to modify or change the pr ppp products at any time without notice. The accuracy or completeness of such information is not guaranteed. The technical information, suggestions and other stat-ments contained in this document have been complied for your guidance and usage, Make sure the surface you wish to place the tape on is cleaned, dried and free from oil and dust, Beyond Fabchem reminds the user of the products to make sure that the product used as per the instruction and suggestions provide. It is the user’s sole responsibility of the product in actual application specific conditions.
NOTE:-
The above mentioned data are typical values only. Suggestion for use and final results correspond to our departmental technical experience but cannot be intended as our commitment or liability. The user will determine the suitability of the product and the method of application for each specific use.
Information is subject to change without notice.